CONTAC US


Type of Walk In Cooler Insulated Doors


Turn Key Systems offers a vast selection of doors to accomodate any application. Custom-built doors are available upon request. Keep in mind that self-closing mechanisms available as an accessory item, except in California where self-closing is required by law and come standard.

Standard Entry Door


This standard entry door is available in “overlapping” and flush “in-fitting” style, from 2’6” up to 5’ wide. Our doors are designed for use in environmentally controlled buildings, such as freezers and coolers. All of our doors suitable for both interior and exterior applications. Our 3’ door suitable for hand trucks while our 60” door is suitable for pallet jacks. For higher volume we recommend our larger sliding doors.





Standard Walk In Cooler Entry Door

Horizontal Sliding Door


Sliding Doors are available from 3' up to 20' wide for warehouse applications and come in either manual or electric for easier operation. They are also available in bi-parting, roll-up, and vertical-lift styles (see Vertical Lift Door and Sectional Overhead Door below). This design is perfectly suited for applications where space limitations restrict the use of swinging doors, or when installation space is available only on one side of the door opening. Horizontal sliding doors are most suitable when opening speed is not of great importance. Typically it is utilized for both pedestrian and material handling traffic, and available with eletcric or manual operation.



Horizontal Sliding Door

Bi-Parting Horizontal Sliding Door


Ideal for applications where fast opening and closing is important, especially in areas where material handling equipment such as forklifts and pallet jacks operate. It is suitable for coolers, freezers, warehouses and industrial buildings. Available with electric or manual operation.



Bi-Parting Horizontal Sliding Door

Vertical Lift Door


This type of sliding door is ideal for applications where there is minimum side room, or when several door openings are close together. It is suitable for drive-thru traffic in conjunction with forklifts and other freight transfer vehicles. Available with electric or manual operation. if the head room is limited to slightly more than half the door height, a double vertical lift door is also available.



Vertical Lift Door

Sectional Overhead Door


Designed for operation in tight spaces where side room and head room are limited. It is most efficient for use in coolers, freezers, and industrial/commercial buildings.



Sectional Overhead Door

Bi-Folding Door


Electric bi-folding door operates at a quicker clear opening speed and provides access for all types of material handling traffic. It is ideal for door openings where side room on both sides of the door is limited to 12" or less. Especially well suited to renovation or retrofit uses, it is available with manual or power operation for coolers, freezers, and industrial/commercial buildings.



Bi-Folding Door

Overlap Freezer Stainless Steel Door


Most often used as pedestrian traffic door for extreme low temperature, This type is ideal for blast freezer and extreme low temperature applications.



Overlap Freezer Stainless Steel Door

Glass Door


Glass Doors are a vital element for retailers. Their focus is to maximize the sales of food & beverage products through better merchandising. The key element we look for in a glass door manufacturer is finding the largest available glass doors. Larger doors allow better display of the products and provide greater access to more products per door. Smaller doors, which are constructed of more metal and glass, fail to maximize the retail potential.
To figure out the quantity of doors you can fit into your space, use the Guide to Glass Door Configurations.


Walk In Cooler Insulated Glass Door


©2006 Turn Key Systems, Inc. All Rights Reserved.
Applications | Panels & Finishes | Door Options | Compressors & Coils | Accessories | Services | Bid Form | About TKS | FAQ

6680 Alhambra Ave #219 Martinez, CA 94553